Description
Fabtech’s JL Crawler long arm systems are built to meet the most experienced driver’s expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler’s 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2″ OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech’s legendary 5 Ton joints(R) that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.
Specifications:
| California Proposition 65 | WARNING: Cancer & Reproductive Harm and image |
| Description_ASC | W/ STANDARD FENDERS TIRE SIZE – 35/12.5R17 Wheel – 17X9 W/4.5″ BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE – 35/12.5R18 Wheel – 18X9 W/4.5″ BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE – 325/65R18 Wheel – 18X9 W/4.5″ BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE – 35/12.5R20 Wheel – 20X9 W/5″ BS W/MINOR TRIMMING; W/ STANDARD FENDERS TIRE SIZE – 325/60R20 Wheel – 20X9 W/5″ BS W/MINOR TRIMMING; W/ HIGH CLEARANCE FENDERS TIRE SIZE – 37/12.5R17 Wheel – 17X9 W/4.5″ BS W/CUTTING; W/ HIGH CLEARANCE FENDERS TIRE SIZE – 37/12.5R18 Wheel – 18X9 W/4.5″ BS W/CUTTING; W/ HIGH CLEARANCE FENDERS TIRE SIZE – 37/12.5R20 Wheel – 20X9 W/5″ BS W/CUTTING; 50. INSTALLATION REQUIRES WELDING.; 121. FITS 6 CYL GAS MODELS ONLY.; 185. FITS 4-DOOR MODELS ONLY; 192. EXHAUST MODIFICATION REQUIRED OR ORDER AFE P/N 48-48024 LOOP DELETE PIPE.; 19REQUIRES DRIVESHAFTS 4 DOOR MODELS FRONT (FTS94057) REAR (FTS94065) |
| Description_ASC | W/STANDARD FENDERS TIRE SIZE-35/12.5R17 WHEEL-17X9 W/4.5in. BS W/MINOR TRIMMING; W/STANDARD FENDERS TIRE SIZE-35/12.5R18 WHEEL-18X9 W/4.5in. BS W/MINOR TRIMMING; W/STANDARD FENDERS TIRE SIZE-325/65R18 WHEEL-18X9 W/4.5in. BS W/MINOR TRIMMING; W/STANDARD FENDERS TIRE SIZE-35/12.5R20 WHEEL-20X9 W/5in. BS W/MINOR TRIMMING; W/STANDARD FENDERS TIRE SIZE-325/60R20 WHEEL-20X9 W/5in. BS W/MINOR TRIMMING; W/HIGH CLEARANCE FENDERS TIRE SIZE-37/12.5R17 WHEEL-17X9 W/4.5in. BS W/CUTTING; W/HIGH CLEARANCE FENDERS TIRE SIZE-37/12.5R18 WHEEL-18X9 W/4.5in. BS W/CUTTING; W/HIGH CLEARANCE FENDERS TIRE SIZE-37/12.5R20 WHEEL-20X9 W/5in. BS W/CUTTING; 50. INSTALLATION REQUIRES WELDING.; 121. FITS 6 CYL GAS MODELS ONLY.; 185. FITS 4-DOOR MODELS ONLY; 192. EXHAUST MODIFICATION REQUIRED OR ORDER AFE P/N 48-48024 LOOP DELETE PIPE.; 193. REQUIRES DRIVESHAFTS 4 DOOR MODELS FRONT (FTS94057) REAR (FTS94065) |
| Description_DEF | Suspension Lift Kit |
| Description_DES | 3″ COIL KIT F&R 4DR |
| Description_DES | 3″ CRAWLER W/ STEALTH 2018-22 JEEP JL 4-DOOR |
| Description_DES | 3″ LONG ARM BOX KIT |
| Description_DES | Crawler Lift Kit |
| Description_DES | DRAG LINK KIT |
| Description_DES | LONG ARM KIT FRT |
| Description_DES | LONG ARM KIT REAR |
| Description_DES | STEALTH MONOTUBE |
| Description_EXT | 3″ COIL KIT F&R 4DR |
| Description_EXT | 3″ CRAWLER W/ STEALTH 2018-22 JEEP JL 4-DOOR. |
| Description_EXT | 3″ LONG ARM BOX KIT |
| Description_EXT | Crawler Lift Kit; 3 in. Crawler; w/ Stealth; |
| Description_EXT | DRAG LINK KIT |
| Description_EXT | LONG ARM KIT FRONT |
| Description_EXT | LONG ARM KIT REAR |
| Description_EXT | STEALTH MONOTUBE |
| Description_FAB | Front & Rear Brake Line Drops |
| Description_FAB | Front & Rear Bump Stop Extensions |
| Description_FAB | Front & Rear Corner Specific Dual Rate Coil Springs |
| Description_FAB | Front & Rear Lower 5 Ton Link Arms |
| Description_FAB | Front & Rear Stealth Monotube Shocks |
| Description_FAB | Front & Rear Sway Bar Links |
| Description_FAB | Front & Rear Track Bar Bracket |
| Description_FAB | Front Link Arm Crossmember & Skid Plate |
| Description_FAB | Front Shock Mount Brackets |
| Description_FAB | Heavy Duty Flipped Draglink |
| Description_FAB | Rear Lower Link Arm Mounts |
| Description_INV | Fabtech-3″ CRAWLER W/ STEALT |
| Description_LAB | Proposition 65 |
| Description_MKT | Fabtech’s JL Crawler long arm systems are built to meet the most experienced driver’s expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler’s 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2″ OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech’s legendary 5 Ton joints(R) that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street. |
| Description_MKT | Fabtech’s JL Crawler long arm systems are built to meet the most experienced driver’s expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further. A key part of the mounting of the Crawler’s 5 Ton Link Arms to the frame is the geometry and ground clearance. The location of the frame side of the link arms is critical in providing superior handling throughout the travel range. Fabtech has found the sweet spot geometry for the link arms that provide a superior driving long arm system compared to all others on the market. Front link arm are mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is a key in not only in mounting the Links arms at the correct geometry but it adds critical strength to the lighter weight JL frame for hard offroad use. Rear links attach to new frame mounts on the side of the frame for increased ground clearance and approach angle. The Fabtech lower Link Arms are massive and built of 2in OD .313 thick wall tubing that is guaranteed not to bend. Upper and lower Link Arms includes the Fabtech’s legendary 5 Ton joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street. |
| Description_SHO | 3″ CRAWLER W/ STEALT |
| Description_SHO | LftKt-Suspw/Shock |
| height | 21.6 |
| length | 49.5 |
| LTL | N |
| Title | Fabtech 3″ CRAWLER W/ STEALTH 2018-22 JEEP JL 4-DOOR |
| weight | 357.0 |
| width | 48.42 |
Explore more from our collection.
Reviews
There are no reviews yet.